Iron plate, an extremely familiar term, is widely used in manufacturing industries such as mechanical industry, machinery and equipment, cars, and so on. Long term storage of iron plates is difficult to prevent floating rust. Due to process requirements, some processing methods will be used to meet our desired standards, such as flame cutting, sawing, etc. However, through subsequent processing, a large number of burrs and cutting edges will occur, which is not conducive to the future process requirements of abrasive flow manufacturers and must be removed.
What equipment should be used for deburring iron plates?
Regarding the polishing and deburring methods of abrasive flow manufacturers' iron plates, simple tools such as sandpaper and brushes are manually used for polishing; By using a grinding machine, the machine is planned to drive the upper grinding seat and steel wire flat brush through two cylinders, and the lower grinding seat and steel wire flat brush through two hydraulic cylinders, achieving a reasonable compaction and loosening of the workpiece during grinding; The results of the work process indicate that the transmission organization separates the torque input by the reduction motor from the upper and lower grinding seats, driving the two to move back and forth in a staggered manner. The steel plate during the trek is cleaned and polished to remove rust by a steel wire brush. However, the two methods of manual polishing and polishing machines have low work efficiency, high labor intensity, and uneven process quality.
